Leather Laptop Backpack 15.6" Piquadro x Audi Revolut F1® Team
Leather Laptop Backpack 15.6" Piquadro x Audi Revolut F1® Team
Leather Laptop Backpack 15.6" Piquadro x Audi Revolut F1® Team
Leather Laptop Backpack 15.6" Piquadro x Audi Revolut F1® Team
Leather Laptop Backpack 15.6" Piquadro x Audi Revolut F1® Team
Leather Laptop Backpack 15.6" Piquadro x Audi Revolut F1® Team

Leather Laptop Backpack 15.6" Piquadro x Audi Revolut F1® Team

R$ 6.600,00 VAT included

Color: black

Buy also...

Red backback - front Water-Resistant Roll-Top Laptop Backpack 15.6" Piquadro x Ducati - 7

Corner 2.0 Ducati
R$ 3.480,00
21.7" Cabin Luggage with USB-C TSA Lock Piquadro x Ducati - 9 21.7" Cabin Luggage with USB-C TSA Lock Piquadro x Ducati - 10

Pop DUCATI
R$ 3.960,00
15.6-inch Laptop Backpack with RFID Protection Piquadro x Ducati - 1 15.6-inch Laptop Backpack with RFID Protection Piquadro x Ducati - 2

Corner 2.0 Ducati
R$ 3.240,00
Roll-Top 15.6" Laptop Backpack Piquadro x Ducati - 5 Roll-Top 15.6" Laptop Backpack Piquadro x Ducati - 6

Corner 2.0 Ducati Centenario
R$ 3.576,00
Pop-Up Card Holder Wallet with RFID Protection Piquadro x Ducati - 5

DUCATI
R$ 936,00
Water-Resistant Sling Bag for iPad® mini Piquadro x Ducati - 1 Water-Resistant Sling Bag for iPad® mini Piquadro x Ducati - 2

Corner 2.0 Ducati
R$ 1.800,00
Piquadro × Ducati limited-edition cabin suitcase, aluminum and leather, TSA lock, retractable handles, 31 L capacity. Aluminum Cabin Luggage with TSA Lock Piquadro x Ducati - 2

Corner 2.0 Ducati
R$ 12.000,00
Water-Resistant Bum Bag with RFID Protection Piquadro x Ducati - 1 Water-Resistant Bum Bag with RFID Protection Piquadro x Ducati - 2

Corner 2.0 Ducati
R$ 1.560,00
Pop-Up Card Holder with RFID Protection Piquadro x Ducati - 1 Pop-Up Card Holder with RFID Protection Piquadro x Ducati - 2

DUCATI
R$ 900,00
MagSafe® Card Holder with RFID Protection Piquadro x Ducati - 1 MagSafe® Card Holder with RFID Protection Piquadro x Ducati - 2

DUCATI
R$ 828,00
Zip Passport Holder with RFID Protection Piquadro x Ducati - 1 Zip Passport Holder with RFID Protection Piquadro x Ducati - 2

Corner 2.0 Ducati
R$ 1.020,00
Slim Water-Resistant Cabin Carry-On Piquadro x Ducati - 1 Slim Water-Resistant Cabin Carry-On Piquadro x Ducati - 2

Corner 2.0 Ducati
R$ 3.360,00

Product Features

Combined Shape Line 4

Fingerprint lock and RFID-shielded lining on a limited edition with the Audi Revolut F1® Team; the expansion zip adds depth, and a rain cover stows inside.

Number of compartments
Can contain
PC holder features
Translation missing: en.products.product.pdp_details.pdp_details_label.1105_porta_ipad_102__air_109__pro_11
AirPods® pocket
Helmet attachment for protection
Security system
Handle type
Expansion system
Pockets for induction charging
Power bank pocket
Eyeglasses holder
Rain cover
Shoe holder
25,50
Capacity
Equipped with customizable Tag
Translation missing: en.products.product.pdp_details.pdp_details_label.altezza
Translation missing: en.products.product.pdp_details.pdp_details_label.base
Product code
Translation missing: en.products.product.pdp_details.pdp_details_label.pq_info_disponibilita
Translation missing: en.products.product.pdp_details.pdp_details_label.profondita
Translation missing: en.products.product.pdp_details.pdp_details_label.zoom_enabled

Technical specifications

Number of compartments:
2
Can contain:
15,6" notebook
PC holder features:
Shock Absorber
iPad® 10,2''Air 10,9''Pro 11'' Holder:
not removable
AirPods® pocket:
Yes
Helmet attachment for protection:
With net
Material:
leather
Internal lining:
100% Poliestere
Security system:
Fingerprint locking
Handle type:
sewn
Expansion system:
yes
Pockets for induction charging:
yes
Power bank pocket:
yes
Eyeglasses holder:
with pocket
Rain cover:
yes
Shoe holder:
yes
Capacity:
25,50
Equipped with customizable Tag:
Yes
Product code:
CA6592B2ABM
Translation missing: en.products.product.pdp_details.pdp_details_label.pq_info_disponibilita:
SHOP
Dimensions:
34.0 x 42.0 x 16.0 (cm)
Weight:
1810 gr

View more features

Product Tests

Combined Shape Line 4

  • Product test

    • Handle test

  • Leather tests

    • pH test
    • Veslic test
    • Water staining
    • Tape test

  • Metal accessories

    • Oxydation test
    • Salt test
    • Cross cut test

The tests we perform

Every product undergoes a series of laboratory checks before entering production.

  • Product test

    Handle test

    The purpose is to evaluate the strength and resistance of the handles and straps. After the product is loaded, it is closed and its handle or strap is fixed to the test machine's “J-hook” and subjected to numerous stresses.

  • Leather tests

    pH test

    This allows for the determination of the actual pH value of leather, which should be between 3.5 and 4.5.

    Veslic test

    It's useful to estimate the resistance of any type of leather to wearing, scraping or colour rubbing. The leather sample is tested dry, damp and also under a removable weight of 1 kg.

    Water staining

    The leather's response to stains is determined by pouring small drops of water on its surface and then checking it every 30 minutes and after 24 hours. No stain, mark or wave is allowed on the leather.

    Tape test

    Checks the resistance of the leather's finish. A layer of adhesive tape is applied and the leather is checked after it has been ripped off.

  • Metal accessories

    Oxydation test

    The metal accessory is placed in an environment with a very high moisture content and a controlled temperature of 65°C, in contact with a leather sample (element with acidic pH). The resistance time is 96 hours. The test is used to highlight any oxidation of the accessory which, of course, is not permitted.

    Salt test

    The metal accessory is placed in a special machine where a salt spray with 50% sodium chloride concentration is sprayed at a controlled temperature of 35°C for a period of 24 hours. The test is used to highlight any oxidation of the accessory which, of course, is not permitted.

    Cross cut test

    The surface finish of the accessory is cut with a special blade, until it reaches the metal layers below. The cuts are made close to each other and checkerboard style, to create smaller finishing surfaces and therefore those that are more susceptible to detachment, as if they were small flakes. Subsequently, a dedicated adhesive is applied and removed once it has totally dried: the finish should not detach.

Product Maintenance

Combined Shape Line 4
Manteinance of leather parts

The leather is a "live" material, so any small imperfections, spots or grains are a distinctive feature of the leather and guarantee the absence of synthetic finishing substances. To maintain the original characteristics of the leather unaltered over time, we recommend using only specific neutral wax-based fluid products that do not contain solvents, benzene or alcohol for its cleaning.
Use a small quantity of product on a soft cloth, never directly on the leather, and apply it gently on the area with small circular movements. Do not immerse the product in water. If it comes into contact with water, dry it quickly by dabbing with a dry cotton cloth, without rubbing. Do not expose the product to sources of direct heat. Do not iron. Remember that leather might release traces of colour as a result of repeated rubbing on clothing. For manteinance and cleaning you can buy our Cleaning kit for leather and fabric.
Manteinance of fabric part

To clean the fabric, we recommend you use a damp sponge with water and mild soap. Do not use soap or water directly on the product. Gently rub the fabric and then rinse with a clean damp sponge, then dab with a cotton cloth. Let the fabric dry while avoiding direct contact with sources of heat or sunlight.
We recommend that you pad the product well while it is drying to help it retain its original shape. If after cleaning slight marks or areas having a slightly different colour should appear, perform the procedure on a larger surrounding area to make sure the product has a uniform appearance. To avoid marks or discolouration, do not use chemicals or solvents of any kind. Do not iron. Do not dry clean.
For manteinance and cleaning you can buy our Cleaning kit for leather and fabric.

Product Warranty

Combined Shape Line 4
Piquadro offers private customers a 24-month warranty on its products that covers any material and/or manufacturing defects. The warranty will be extended to 36 months if you have completed registration with the Piquadro Club by completely filling in the form contained in the product tags, signing it and returning it to us.
Registration can also be done online, on the Piquadro website, in the My Piquadro section accessible by clicking the Login button at the top right of the home page.
Remember to authorise your consent to the processing of your personal data.