Piquadro x Ducati 100" roll top laptop backpack
Piquadro x Ducati 100" roll top laptop backpack
Piquadro x Ducati 100" roll top laptop backpack
Piquadro x Ducati 100" roll top laptop backpack
Piquadro x Ducati 100" roll top laptop backpack
Piquadro x Ducati 100" roll top laptop backpack
Piquadro x Ducati 100" roll top laptop backpack
Piquadro x Ducati 100" roll top laptop backpack
Piquadro x Ducati 100" roll top laptop backpack

Piquadro x Ducati 100" roll top laptop backpack

€298,00 VAT included

Or 3 rates of €99,33

Color: 750 F1 1984 

Buy also...

Red backback - front Commute backpack backpack "Piquadro x Ducati" - 7

Corner 2.0 Ducati
€290,00
4 wheel cabin suitcase "Piquadro x Ducati" - 9 4 wheel cabin suitcase "Piquadro x Ducati" - 10

Pop DUCATI
€330,00
Laptop backpack "Piquadro x Ducati" - 1 Laptop backpack "Piquadro x Ducati" - 2

Corner 2.0 Ducati
€270,00
Piquadro x Ducati 100" roll top laptop backpack - 5 Piquadro x Ducati 100" roll top laptop backpack - 6

Corner 2.0 Ducati Centenario
€298,00
Pop-up wallet "Piquadro x Ducati" - 5

DUCATI
€78,00
Piquadro × Ducati limited-edition cabin suitcase, aluminum and leather, TSA lock, retractable handles, 31 L capacity. 4 wheel cabin suitcase "Piquadro x Ducati" - 2

Corner 2.0 Ducati
€1.000,00
Water resistant sling bag "Piquadro x Ducati" - 1 Water resistant sling bag "Piquadro x Ducati" - 2

Corner 2.0 Ducati
€150,00
Piquadro x Ducati" bum bag - 1 Piquadro x Ducati" bum bag - 2

Corner 2.0 Ducati
€130,00
Pop-up card holder "Piquadro x Ducati" - 1 Pop-up card holder "Piquadro x Ducati" - 2

DUCATI
€75,00
MagSafe® pop-up card holder "Piquadro x Ducati" - 1 MagSafe® pop-up card holder "Piquadro x Ducati" - 2

DUCATI
€69,00
Zip-around passport holder "Piquadro x Ducati" - 1 Zip-around passport holder "Piquadro x Ducati" - 2

Corner 2.0 Ducati
€85,00
Water resistant carry-on "Piquadro x Ducati" - 1 Water resistant carry-on "Piquadro x Ducati" - 2

Corner 2.0 Ducati
€280,00

Ducati 750 SS 1977

In 1977, Cook Neilson triumphed on the Daytona oval circuit riding a Ducati 750 SS prepared by Phil Schilling, securing the first victory for an Italian motorcycle in a U.S. production-based race. This success gave Ducati significant visibility overseas, helping to boost its popularity and sales.

Ducati 900 SD Darmah 1997

In the 1970s, the black and gold livery became iconic in motorsport. This trend also influenced Ducati, which adopted the “black and gold” styling, designed by Leopoldo Tartarini with a logo by Giugiaro, for models such as the Ducati Darmah and Ducati SuperSport.

Ducati 500 SL Pantah 1979

In 1979, Ducati introduced the 500 SL Pantah, bringing a series of technical innovations that would become defining features of the Borgo Panigale brand, including the Pantah engine with belt-driven camshafts and the trellis frame.

Ducati 750 F1 1984

The Tricolore livery, which became a symbol of many Ducati special models, debuted in 1984 with the 750 F1. Successful from the outset, the bike achieved numerous victories, including the Battle of the Twins at Daytona in 1986 with Marco Lucchinelli.

Product Features

Combined Shape Line 4

Ducati 100 special edition in water-resistant fabric: 26 L, Shock Absorber compartment for a 15.6" laptop, RFID protection and a bike-lock attachment.

Number of compartments
Can contain
PC holder features
Translation missing: en.products.product.pdp_details.pdp_details_label.1105_porta_ipad_102__air_109__pro_11
Adjustable sternum strap
Bicycle anti-theft attachment
Handle type
Badge holder
Flashlight attachment
Eyeglasses holder
26
Capacity
Translation missing: en.products.product.pdp_details.pdp_details_label.altezza
Translation missing: en.products.product.pdp_details.pdp_details_label.base
Product code
Translation missing: en.products.product.pdp_details.pdp_details_label.profondita
Translation missing: en.products.product.pdp_details.pdp_details_label.zoom_enabled

Technical specifications

Number of compartments:
1
Can contain:
15,6" notebook
PC holder features:
Shock Absorber
iPad® 10,2''Air 10,9''Pro 11'' Holder:
not removable
Adjustable sternum strap:
Horizontal and Vertical
Bicycle anti-theft attachment:
Yes
Material:
fabric
Internal lining:
100% Poliestere
Handle type:
sewn
Badge holder:
fixed
Flashlight attachment:
Yes
Eyeglasses holder:
with pocket
Capacity:
26
Product code:
CA6291C2OWDC
Dimensions:
37.0 x 47.0 x 17.0 (cm)
Weight:
1176 gr

View more features

Product Tests

Combined Shape Line 4

  • Product test

    • Handle jerk test
    • Tumble test
    • Mileage test
    • Straight drop test

  • Fabric tests

    • Adhesion of coating / tensile breaking / seam breaking
    • Water resistance test
    • Crocking
    • Abrasion resistance

  • Metal accessories

    • Oxydation test
    • Salt test
    • Cross cut test

The tests we perform

Every product undergoes a series of laboratory checks before entering production.

  • Product test

    Handle jerk test

    The purpose is to evaluate the strength and resistance of the handles and straps. After the product is loaded, it is closed and its handle or strap is fixed to the test machine's “J-hook” and subjected to numerous stresses.

    Tumble test

    Simulation of an airplane trip: from check-in to retrieval. The product is filled, closed and placed in a freezer at -12°C for 4 hours in order to reproduce baggage conditions in the cargo hold. It is then placed in the tumbler and subjected to 50 drop cycles.

    Mileage test

    This allows for the evaluation of the product's structural integrity and its resistance at the attachment points: wheels, handles and parts that are subject to impact. The loaded product is closed and then runs a 32 km course of short and long obstacles along a transport belt.

    Straight drop test

    The fully loaded suitcase is dropped on corners: 25 drops from a height of 60 cm with the product at a temperature of -12°C, to test the bag's structural resistance.

  • Fabric tests

    Adhesion of coating / tensile breaking / seam breaking

    Allows for the determination of the resistance to breakage for all materials used in the products, or the resistance of the adhesion between the fabric and its support. The samples, cut on both the warp and the weft, are placed between the clamps of a tensor.

    Water resistance test

    It's necessary to evaluate the textile's resistance to water. A tool that looks like a watering can is used to pour water on the fabric as if it were rain — 200 ml of water in total. The water's penetration is then evaluated in terms of how much of the textile's surface is wet: it needs to be below 20%.

    Crocking

    To determine the amount of colour that may be transferred from a surface of dyed textiles to another fabric by being rubbed under dry and wet conditions.

    Abrasion resistance

    The purpose is to determine the fabric's resistance to abrasion. Fabric samples are fastened in place and subjected to being scraped by a rotating platform. In order for the test to be considered successful, there must be no broken threads in the fabric.

    Colour fastness to water and perspiration

    Serves to determine the product's colour fastness upon contact with water and perspiration. The fabrics used in clothing are checked for any colour transfer.

  • Metal accessories

    Oxydation test

    The metal accessory is placed in an environment with a very high moisture content and a controlled temperature of 65°C, in contact with a leather sample (element with acidic pH). The resistance time is 96 hours. The test is used to highlight any oxidation of the accessory which, of course, is not permitted.

    Salt test

    The metal accessory is placed in a special machine where a salt spray with 50% sodium chloride concentration is sprayed at a controlled temperature of 35°C for a period of 24 hours. The test is used to highlight any oxidation of the accessory which, of course, is not permitted.

    Cross cut test

    The surface finish of the accessory is cut with a special blade, until it reaches the metal layers below. The cuts are made close to each other and checkerboard style, to create smaller finishing surfaces and therefore those that are more susceptible to detachment, as if they were small flakes. Subsequently, a dedicated adhesive is applied and removed once it has totally dried: the finish should not detach.

Product Maintenance

Combined Shape Line 4
Manteinance of leather parts

The leather is a "live" material, so any small imperfections, spots or grains are a distinctive feature of the leather and guarantee the absence of synthetic finishing substances. To maintain the original characteristics of the leather unaltered over time, we recommend using only specific neutral wax-based fluid products that do not contain solvents, benzene or alcohol for its cleaning.
Use a small quantity of product on a soft cloth, never directly on the leather, and apply it gently on the area with small circular movements. Do not immerse the product in water. If it comes into contact with water, dry it quickly by dabbing with a dry cotton cloth, without rubbing. Do not expose the product to sources of direct heat. Do not iron. Remember that leather might release traces of colour as a result of repeated rubbing on clothing. For manteinance and cleaning you can buy our Cleaning kit for leather and fabric.
Manteinance of fabric part

To clean the fabric, we recommend you use a damp sponge with water and mild soap. Do not use soap or water directly on the product. Gently rub the fabric and then rinse with a clean damp sponge, then dab with a cotton cloth. Let the fabric dry while avoiding direct contact with sources of heat or sunlight.
We recommend that you pad the product well while it is drying to help it retain its original shape. If after cleaning slight marks or areas having a slightly different colour should appear, perform the procedure on a larger surrounding area to make sure the product has a uniform appearance. To avoid marks or discolouration, do not use chemicals or solvents of any kind. Do not iron. Do not dry clean.
For manteinance and cleaning you can buy our Cleaning kit for leather and fabric.

Product Warranty

Combined Shape Line 4
Piquadro offers private customers a 24-month warranty on its products that covers any material and/or manufacturing defects. The warranty will be extended to 36 months if you have completed registration with the Piquadro Club by completely filling in the form contained in the product tags, signing it and returning it to us.
Registration can also be done online, on the Piquadro website, in the My Piquadro section accessible by clicking the Login button at the top right of the home page.
Remember to authorise your consent to the processing of your personal data.