Note/credit cart facility
This allows for the determination of the actual pH value of leather that should be between 3.5 and 4.5
Establishes the propensity of oxidation of the metallic surfaces due to contact with skin or water. No oxidation is permitted.
Colourfastness to water / to perspiration test
Serves to determine the product's colourfastness upon contact with water and perspiration. The fabrics used in clothing are checked for any colour transfer.
It's useful to estimate the resistance of any type of leather to wearing, scraping or colour rubbing. The leather's sample is tested dry, damp and also under a removable weight of 1 Kg
Water staining test
The leather's response to stains is determined pouring small drops of water on its surface and then checking it every 30 minutes and after 24 hours. No stain, mark or wave is allowed on the leather.
Cross cut test
The resistance of the metal accessory's finish is evaluation by simulating normal deterioration. An incision is made using a cutter and the behaviour of the finish is noted.
Salt spray test
It establishes the tendency of metallic surfaces towards oxidation or damage to the finish due to salt spray (spray at 47°C - test duration: 24h). No oxidation is permitted.
Checks the resistance of the leather's finish. A layer of adhesive tape is applied and the leather is checked after it has been ripped off.
- weight 0.068 g
- measures 12,50 x 9,00 x 2,00 (cm)
- Number of dividers 2
- Type of construction soft
- Additional information about construction horizontal
- Manufacturing sharp cut
- Material Leather
- Note/credit cart facility 4
- Data Disponibilita Futura 2019-09-05
- Animal hide origin Bovine
- Secondary fabric composition 100% Poliyester