Adhesion of coating tensile seam breaking test
Allows for the determination of the resistance to breakage for all materials used in the products or the resistance of the adhesion between the fabric and its support. The samples, cut on both the warp and on the weft, are placed between the clamps of a tensor.
Colorfastness to crocking test
To determine the amount of colour that may be transferred from a surface of dyed textiles to other fabric by being rubbed under dry & wet conditions.
Handle jerk test
The purpose is to evaluate the strength and resistance of the handles and straps. After the product is loaded, it is closed and its handle/strap is fixed to the test machine's "J-hook" and subjected to numerous stresses.
Abrasione resistance test
The purpose is to determine the fabric's resistance to abrasion. Fabric samples are fastened in place and subjected to being scraped by a rotating platform. In order for the test to be considered successful, there must be no broken threads in the fabric.
Water resistance test
It's necessary to evaluate the textile's resistance to water. A tool that looks like a "watering can" is used to pour water on the fabric like it was rain - 200ml of water in total. The water's penetration is then evaluated in terms of how much textile's surface is wet - it needs to be below 20%.
Establishes the propensity of oxidation of the metallic surfaces due to contact with skin or water. No oxidation is permitted.
Colourfastness to water / to perspiration test
Serves to determine the product's colourfastness upon contact with water and perspiration. The fabrics used in clothing are checked for any colour transfer.
Cross cut test
The resistance of the metal accessory's finish is evaluation by simulating normal deterioration. An incision is made using a cutter and the behaviour of the finish is noted.
Salt spray test
It establishes the tendency of metallic surfaces towards oxidation or damage to the finish due to salt spray (spray at 47°C - test duration: 24h). No oxidation is permitted.
- weight 0.876 g
- measures 24,00 x 45,00 x 13,00 (cm)
- Number of dividers 2
- Type of construction semirigid
- Additional information about construction vertical
- Thickness of the article with gusset
- Manufacturing turned
- Material fabric
- Fabric composition 40% Recycled Polyester, 60% Polyester + TPU
- Interior Organisation
- Number of handles 1
- Type of handles sawn
- Mobile holder features exterior mobile phone pocket
- Glasses case glasses pocket
- Utility pocket fixed
- Waist belt
- Adjustable chest strap Yes
- Multifunction Adjustable Ventral Strap Fixed
- % fabric on product 100%
- Animal hide origin No Leather
- Recycled product Yes
- PQ-Recycled Index 21%
- Reflective strip yes
- Shoulder protection not removable
- Whistle Yes
- Set-up for water pouch si
- Compression straps yes
- Snack pocket yes
- Scratch-resistant microfiber pocket yes