Type of handles
Handle jerk test
The purpose is to evaluate the strength and resistance of the handles and straps. After the product is loaded, it is closed and its handle/strap is fixed to the test machine's "J-hook" and subjected to numerous stresses.
This allows for the evaluation of the product's structural integrity and its resistance at the attachment points: wheels, handles and parts that are subject to impact. The loaded product is closed and then runs a 32km course of short and long obstacles along a transport belt.
Establishes the propensity of oxidation of the metallic surfaces due to contact with skin or water. No oxidation is permitted.
Simulation of an airplane trip: from check-in to retrieval. The product is filled, closed and placed in a freezer at -12°C for 4 hours in order to reproduce baggage conditions in the cargo hold. It is then placed in the tumbler and subjected to 50 drop cycles.
Cross cut test
The resistance of the metal accessory's finish is evaluation by simulating normal deterioration. An incision is made using a cutter and the behaviour of the finish is noted.
Salt spray test
It establishes the tendency of metallic surfaces towards oxidation or damage to the finish due to salt spray (spray at 47°C - test duration: 24h). No oxidation is permitted.
Straight drop test
The fully loaded suitcase is dropped on corners (25 drops from a height of 60 cm with the product at a temperature of -12°C) to test the bag's structural resistance.
- weight 6.918 g
- measures 51,00 x 79,00 x 27,50 (cm)
- Number of dividers 1
- Type of construction rigid
- Additional information about construction vertical
- Thickness of the article with gusset
- Trolley system double telescopic handlee
- Closure double
- Type of lock TSA lock
- Material metal and leather
- Number of handles 2
- Type of handles stow-away handles
- Adress tag unhookable
- Capacity 85
- Animal hide origin Bovine
- Secondary fabric composition 100% Poliyester
- Warranty 10