PC Sleeve Size
PC Sleeve Type
Trolley fitting accessory
iPad®Air - iPad®Pro 9.7/iPad 11" sleeve
This allows for the determination of the actual pH value of leather that should be between 3.5 and 4.5
Handle jerk test
The purpose is to evaluate the strength and resistance of the handles and straps. After the product is loaded, it is closed and its handle/strap is fixed to the test machine's "J-hook" and subjected to numerous stresses.
This allows for the evaluation of the product's structural integrity and its resistance at the attachment points: wheels, handles and parts that are subject to impact. The loaded product is closed and then runs a 32km course of short and long obstacles along a transport belt.
Establishes the propensity of oxidation of the metallic surfaces due to contact with skin or water. No oxidation is permitted.
Colourfastness to water / to perspiration test
Serves to determine the product's colourfastness upon contact with water and perspiration. The fabrics used in clothing are checked for any colour transfer.
It's useful to estimate the resistance of any type of leather to wearing, scraping or colour rubbing. The leather's sample is tested dry, damp and also under a removable weight of 1 Kg
Water staining test
The leather's response to stains is determined pouring small drops of water on its surface and then checking it every 30 minutes and after 24 hours. No stain, mark or wave is allowed on the leather.
Cross cut test
The resistance of the metal accessory's finish is evaluation by simulating normal deterioration. An incision is made using a cutter and the behaviour of the finish is noted.
Salt spray test
It establishes the tendency of metallic surfaces towards oxidation or damage to the finish due to salt spray (spray at 47°C - test duration: 24h). No oxidation is permitted.
Checks the resistance of the leather's finish. A layer of adhesive tape is applied and the leather is checked after it has been ripped off.
- weight 2.668 g
- measures 40,00 x 36,00 x 16,00 (cm)
- Number of dividers 10
- Type of construction 30
- Additional information about construction 10
- Thickness of the article 20
- Manufacturing 70
- Trolley system 20
- Shoulder strap 20
- Shoulder strap decoration 20
- PC Sleeve Size 90
- PC Sleeve Type 10
- Additional features of PC compartment 10
- PC sleeve/divider positioning 20
- Trolley fitting accessory 10
- Closure 10
- Type of lock 90
- Material 10
- Interior Organisation 10
- Number of handles 20
- Type of handles 10
- Mobile holder features 10
- Pen holder 10
- Utility pocket 10
- Capacity 20
- iPad®Air - iPad®Pro 9.7/iPad 11" sleeve 20
- Animal hide origin 10
- Secondary fabric composition 20
- Smart Tracker 10