Adhesion of coating tensile seam breaking test
Allows for the determination of the resistance to breakage for all materials used in the products or the resistance of the adhesion between the fabric and its support. The samples, cut on both the warp and on the weft, are placed between the clamps of a tensor.
Handle jerk test
The purpose is to evaluate the strength and resistance of the handles and straps. After the product is loaded, it is closed and its handle/strap is fixed to the test machine's "J-hook" and subjected to numerous stresses.
This allows for the evaluation of the product's structural integrity and its resistance at the attachment points: wheels, handles and parts that are subject to impact. The loaded product is closed and then runs a 32km course of short and long obstacles along a transport belt.
Simulation of an airplane trip: from check-in to retrieval. The product is filled, closed and placed in a freezer at -12°C for 4 hours in order to reproduce baggage conditions in the cargo hold. It is then placed in the tumbler and subjected to 50 drop cycles.
Straight drop test
The fully loaded suitcase is dropped on corners (25 drops from a height of 60 cm with the product at a temperature of -12°C) to test the bag's structural resistance.
- weight 2.770 g
- measures 40,00 x 55,00 x 20,00 (cm)
- Numero comparti 10
- Tipo di Costruzione 10
- Informazioni ulteriori sulla Costruzione 20
- Spessore articolo 20
- Trolley System 20
- Chiusura 10
- Tipo chiusura 90
- Materiale 100
- Numero manici 10
- Tipologia manici 30
- Address tag 10
- Capacity 39,5
- Availability SHOP
- Pelle origine animale 99
- Composizione Tessuto secondario 20
- Warranty 5