Tipologia Porta PC
Aggancio al trolley
Tipologia Porta Bottiglia
Porta iPad AIR - iPad Pro 9,7/iPad 11"
Adhesion of coating tensile seam breaking test
Allows for the determination of the resistance to breakage for all materials used in the products or the resistance of the adhesion between the fabric and its support. The samples, cut on both the warp and on the weft, are placed between the clamps of a tensor.
Colorfastness to crocking test
To determine the amount of colour that may be transferred from a surface of dyed textiles to other fabric by being rubbed under dry & wet conditions.
This allows for the determination of the actual pH value of leather that should be between 3.5 and 4.5
Handle jerk test
The purpose is to evaluate the strength and resistance of the handles and straps. After the product is loaded, it is closed and its handle/strap is fixed to the test machine's "J-hook" and subjected to numerous stresses.
Abrasione resistance test
The purpose is to determine the fabric's resistance to abrasion. Fabric samples are fastened in place and subjected to being scraped by a rotating platform. In order for the test to be considered successful, there must be no broken threads in the fabric.
Water resistance test
It's necessary to evaluate the textile's resistance to water. A tool that looks like a "watering can" is used to pour water on the fabric like it was rain - 200ml of water in total. The water's penetration is then evaluated in terms of how much textile's surface is wet - it needs to be below 20%.
Establishes the propensity of oxidation of the metallic surfaces due to contact with skin or water. No oxidation is permitted.
Colourfastness to water / to perspiration test
Serves to determine the product's colourfastness upon contact with water and perspiration. The fabrics used in clothing are checked for any colour transfer.
It's useful to estimate the resistance of any type of leather to wearing, scraping or colour rubbing. The leather's sample is tested dry, damp and also under a removable weight of 1 Kg
Water staining test
The leather's response to stains is determined pouring small drops of water on its surface and then checking it every 30 minutes and after 24 hours. No stain, mark or wave is allowed on the leather.
Cross cut test
The resistance of the metal accessory's finish is evaluation by simulating normal deterioration. An incision is made using a cutter and the behaviour of the finish is noted.
Salt spray test
It establishes the tendency of metallic surfaces towards oxidation or damage to the finish due to salt spray (spray at 47°C - test duration: 24h). No oxidation is permitted.
Checks the resistance of the leather's finish. A layer of adhesive tape is applied and the leather is checked after it has been ripped off.
- weight 0.812 g
- measures 27,00 x 38,00 x 14,00 (cm)
- Numero comparti 10
- Tipo di Costruzione 20
- Informazioni ulteriori sulla Costruzione 20
- Spessore articolo 20
- Tipo di lavorazione 70
- Spallaccio 10
- Dimensione Porta PC 110
- Tipologia Porta PC 10
- Caratteristiche Porta PC 10
- Posizionamento Porta PC 20
- Aggancio al trolley 10
- Chiusura 10
- Tipo chiusura 40
- Materiale 20
- Fabric composition 241
- Organizzazione interna 10
- Numero manici 10
- Tipologia manici 10
- Posizionamento Porta Cellulare 10
- Posizionamento Porta Bottiglia 20
- Tipologia Porta Bottiglia 10
- Porta penne 10
- Porta ombrello 10
- Tasca porta oggetti 10
- % Tessuto sul prodotto 390
- Porta iPad AIR - iPad Pro 9,7/iPad 11" 20
- Pelle origine animale 10
- Composizione Tessuto secondario 20